-
-
Raise the Door to the fully Open position. This Unloads the Spring Loading.
-
Secure the Door Webbing to the Roll Tube with rope to hold it in place during this entire process.
-
-
-
Roll Tube in Header Assembly
-
Counterbalance Assembly
-
Metal Washer
-
Spring Mounting Plate
-
Flanged Nuts (3)
-
Connecting Pin with Clip
-
Alignment Tab and Grooves
-
-
-
If the Header Assembly is Installed in the Facility, the Door Roll Assembly will need to be held in place during the removal of the Counterbalance Assembly.
-
Remove three Flanged nuts.
-
Slide the Counterbalance Assembly out of the roll tube.
-
Cancel: I did not complete this guide.
One other person completed this guide.
Team
