X091 Break-Away Track Installation

The Track assembly mounts to the outside of the tab of the Header Assembly Mounting Bracket.

Insert the Carriage Bolt through the Header Bracket Tab from the inside.

Move the Track to the Outside of the Header Bracket, then push the Bolt fully through the Square hole in the Tab and the Track.

Slide the Washer onto the Bolt from the outside of the Track.

Then snug the Hex Nut on the Bolt.

Drill (4) .28 Holes 1.48" from Longer Face of the Metal Angle.

Transfer and drill the Hole locations onto the Back Face of the Track.

Loosely fasten the Angle to the Track.

Plumb the Track.

Secure the Angle to the Mounting Surface with appropriate Hardware.