Strip Door Frame (Aluminum Heavy)

Bolt the Beam to the Posts.

Erect the Frame Structure.

Level and Secure Frame Structure to the Floor.

Bolt the Supports to the Posts.

Plumb the Frame.

Secure the Supports to the Floor.

Assembly of the Posts and Beam may be easier on the floor, then standing the completed Frame upright.

Orient the Post with the Upper Hole

toward the Front of the Frame.

Insert the Flanges of the Beam

into the Top of each Post. (Including any Optional Center Post)

Insert the Shoulder Bolts from the inside of the Posts.

The Upper Bolt should go through the Hole in the Beam Flange.

Install the Nylon Lock Nuts on the outside of the Posts.

Stand the Post and Beam Assembly upright.

Move the Frame Structure to it's Installation Location.

Level, Square and Plumb the Structure.

Anchor the Frame Structure to the Floor.

Supports Bolt to the Outside of the Frame Structure Posts.

With the Frame Plumb (Front to Back)

rest the Support's Floor Mounting Flange on the Floor

Bring the Mounting Angle of the Support to mate with the Outside Face, and the Rear Face of the Post

Bolt the Support to the Post.

Secure the Support to the Floor.

Repeat for the remaining support(s).

Align the Edge of the First Section of Track

with the Inside Face of the Post.

Align the Bottom Edge of the Track to the Bottom Edge of the Beam.

Check for Level.

Secure the First Section of Track to the Beam.

Butt the Second Section of Track up to the Edge of the First, then secure it to the the Beam.

The Last section of Track can be cut to the fill the remaining length to the other Post. (Cut the outermost end.)