Screen - Light, Portable

Assemble a Screen to

two Posts to create a Screen.

Install Feet to create the Standing Screen.

Lay the Posts on a flat surface.

Unroll the Screen between the Posts with the Logo facing Up and at the Bottom.

From the Back Side, insert a Screw

through the Post

through the Screen Slot

through a Washer.

Secure the pack with a Lock Nut.

The Post Bottom has 4 holes. The Bottom Hole is used for mounting the Foot, and is not used in this step.

At the Post Bottom, slide a Screw

through the Post

in a Hole that aligns with the Slot Bottom on the Screen.

Slide a Washer onto the Screw.

Secure the pack with a Lock Nut.

Repeat the process for the other Post.

Orient the Foot to the

"C" Bracket as shown.

Secure the 2 parts together with a Hex Screw creating the "Foot Assembly".

Slide the Foot Assembly into the Post Bottom. The "C" Bracket must be oriented as shown.

From the Back Side, insert a Screw

through the Post's Bottom Hole.

Secure the pack with a Lock Nut.

Repeat this process for the other Foot.