-
-
On the back of the Door Frame, Center the Brush Assembly between the Structural Supports on the back of the Header Mounting Plates, with the Brush Protruding towards the Wall/Mounting Surface.
-
Using the Provided Self-Drilling/Tapping Machine Screws, Secure the Brush Assembly directly into the Cross-Beam of the Door Frame.
-
The Brush Retainer will have Pre-Drilled Holes to accept the Hardware.
-
It is easiest to Mount the Brush Assembly onto the Door Frame before mounting the Door onto the Frame.
-
Almost done!
Finish Line
Team
