Skip to main content

v2.0

Major VersionM

by Trent Borgardt

  1. On the back of the Door Frame, Center the Brush Assembly between the Structural Supports on the back of the Header Mounting Plates, with the Brush Protruding towards the Wall/Mounting Surface. Using the Provided Self-Drilling/Tapping Machine Screws, Secure the Brush Assembly directly into the Cross-Beam of the Door Frame. The Brush Retainer will have Pre-Drilled Holes to accept the Hardware.
    • On the back of the Door Frame, Center the Brush Assembly between the Structural Supports on the back of the Header Mounting Plates, with the Brush Protruding towards the Wall/Mounting Surface.

    • Using the Provided Self-Drilling/Tapping Machine Screws, Secure the Brush Assembly directly into the Cross-Beam of the Door Frame.

    • The Brush Retainer will have Pre-Drilled Holes to accept the Hardware.

    • It is easiest to Mount the Brush Assembly onto the Door Frame before mounting the Door onto the Frame.

Finish Line

Trent Borgardt

Member since: 03/01/2022

3,615 Reputation

57 Guides authored

Team

Engineering Team Member of Engineering Team

3 Members

83 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 24