Mount G1 Face Mount Track Assembly

Remove the Black Plastic Plugs from the Track front. These are Mounting access Holes.

Use a Level to Plumb the Track and Transfer the Mounting Hole locations onto the Mounting Surface.

Remove the Track, and Prepare these locations for Hardware Appropriate to the Building Material.

Most Materials will Require Pre-Drilling Holes to Accept the Necessary Hardware.

With the Track Assembly Reinstalled and “Hanging” in this position, Plumb the Track to make sure it is Vertically Aligned.

Secure the Tracks to the Wall with Hardware Appropriate for your Mounting Surface Material.

Replace Plastic Caps.