v0.5

Minor Versionm

by Mike Bonness

G2 Projection/Offset Mount Bracket Installation

Written By: Todd Lucas (and one other contributor)
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

2

Time Required

Suggest a time??

Sections

1

Flags

0

  1. Orient the slotted end of the Header Mounting Projection Bracket against the Mounting Surface.

    • Orient the slotted end of the Header Mounting Projection Bracket against the Mounting Surface.

    • Orient the flange outward.

    • Align the Bottom surface of the Header Mounting Bracket with the Horizontal line on the Mounting Surface.

    • Align the Outer edge of the Header Mounting Bracket with the Vertical line on the Mounting Surface.

    • Trace the slotted mounting slots onto the Mounting Surface.

  2. Loosely fasten Bracket to the Mounting Surface with appropriate hardware.

    • Loosely fasten Bracket to the Mounting Surface with appropriate hardware.

    • Plumb the Bracket.

    • Tighten Hardware securely.

    • Repeat for the other Header Mounting Bracket.

Finish Line

Author

with 1 other contributor

Todd Lucas

Member since: 03/01/2022

12,996 Reputation

126 Guides authored

Team

Engineering Team Member of Engineering Team

3 Members

80 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 1

All Time: 36