G1-Standard Chain Hoist Assembly Installation

Written By: Trent Borgardt (and 2 other contributors)

Difficulty

Moderate

Steps

Time Required

Step 1 Assemble/Install Chain Hoist

The Chain Hoist Assembly Mounting Bracket should be installed on the Chain Hoist Assembly from the Factory.
If it is not, please see the Exploded View to Determine how to Properly Install it.
Slide the Chain Hoist Assembly onto the Drive Shaft, Making Sure to Install the Machine Key first.
The Drive-Side End of the Header Rail will be Tapped to Receive a 5/16-18 Hex Bolt.
Place a Washer onto the 5/16-18 Hex Bolt, and Place it Through the Chain Hoist Mounting Bracket, and into the Tapped Hole on the end of the Header Rail.
Get this Bolt Started by Hand.
Fasten this Hex Bolt Securely with an Impact Driver or Ratchet.