Chain Hoist Rain Cover Installation - G1/G2

With the Chain Hoist Assembly Installed on the Drive Shaft:

Remove the Top and Bottom Corner Screws holding the Vinyl Roll Cover in place, and Flip the Valance out of the way, Temporarily.

Drop the Chain Hoist Cover onto the Header and over the Chain Hoist Assembly.

Vinyl Roll Cover Omitted completely for Clarity.

Fold the Valance back over the Header AND the Chain Hoist Cover.

Replace the (2) Screws through the Grommets in the Vinyl Cover AND the Holes in the Chain Hoist Cover to Secure it in Place.